Peragon Landmark Compatible Bed Racks & Crossbars: KB Voodoo CXR and PRO-XE

Can you install a truck bed rack or crossbar system with a Peragon Landmark tonneau cover? Yes. KB Voodoo Fabrications offers two proven solutions: our CXR truck bed racks and PRO-XE truck bed crossbars.

Both product lines are compatible with the Peragon Landmark retractable tonneau cover, allowing the cover to fully open and close without removing or adjusting any part of the rack or crossbar system.

No drilling or modification is required for installation.

Whether you're looking for a full-height overland bed rack to carry a rooftop tent or a lower-profile crossbar system for bikes, cargo boxes, and outdoor equipment, you can retain the functionality of your Peragon Landmark cover.

KB Voodoo CXR bed rack installed on a Toyota Tacoma with a Peragon Landmark tonneau cover and Roofnest rooftop tent.

Can You Install a Bed Rack with a Peragon Landmark Tonneau Cover?

One of the biggest challenges when combining a truck bed rack with a retractable tonneau cover is finding a mounting system that doesn't interfere with the cover's operation.

Some bed racks use mounting hardware that occupies the same space as the tonneau cover's rails or mounting brackets. Others may require special adapters, modifications, or removal of rack components to operate the cover.

KB Voodoo's CXR and PRO-XE systems provide a solution specifically suited to the Peragon Landmark.

Our rack and crossbar mounting brackets attach directly to the truck, independently of the Peragon cover's mounting hardware. The Landmark tonneau cover is then installed over the KB Voodoo attachment brackets.

This arrangement allows both systems to coexist while preserving the Landmark's full opening and closing functionality.

The result is a tonneau-compatible truck bed rack or crossbar system that doesn't require you to sacrifice covered bed storage.

KB Voodoo CXR Bed Racks with Peragon Landmark Covers

For truck owners who want the versatility of a full bed rack, the KB Voodoo CXR truck bed rack system provides a modular solution for overlanding, camping, and recreational cargo.

The CXR system uses KB Voodoo's Base Rail System (BRS), which provides a structural foundation along the truck bed.

Unlike rack designs that concentrate their mounting points in limited areas, the CXR Base Rail System is designed to provide full-length bed coverage and distribute cargo loads across the mounting structure.

This design also allows the rack to accommodate compatible tonneau covers, including the Peragon Landmark.

A Real-World Toyota Tacoma Installation

The photographs featured in this article show a Toyota Tacoma equipped with:

• A KB Voodoo CXR bed rack

• A Peragon Landmark retractable tonneau cover

• A Roofnest rooftop tent

This installation demonstrates how a full overland rack and retractable bed cover can be combined into one practical truck setup.

The rooftop tent mounts above the truck bed, while the Peragon cover remains installed underneath the rack.

Importantly, the Landmark cover can still fully open and close without requiring adjustments to the CXR system.

Why Choose the CXR?

The CXR is particularly well suited to customers who want more than a simple set of crossbars.

Its modular construction offers multiple rack heights and configurations, along with accessory mounting options for rooftop tents, recovery equipment, storage systems, and outdoor gear.

The CXR Base Rail System also provides flexible positioning of rack components and additional opportunities for mounting accessories.

For customers planning a dedicated overland or camping setup, the CXR offers a comprehensive cargo-carrying platform while maintaining compatibility with the Peragon Landmark cover.

KB Voodoo PRO-XE Crossbars with Peragon Landmark Covers

Not every truck owner needs a full-height bed rack.

For customers who want to carry equipment above their truck bed while maintaining a lower overall profile, KB Voodoo's PRO-XE truck bed crossbars provide another proven solution.

The PRO-XE system uses heavy-duty steel uprights combined with aluminum T-track crossbars to create a versatile cargo-carrying platform.

Like the CXR, the compatible PRO-XE configurations mount directly to the truck rather than relying on Peragon's tonneau cover mounting hardware.

The Landmark cover installs over the PRO-XE attachment brackets and remains fully operational.

KB Voodoo 5-inch PRO-XE crossbars installed above a Peragon Landmark tonneau cover on a Toyota Tacoma.

Low-Profile Cargo Carrying Without Sacrificing Your Cover

PRO-XE crossbars are an excellent choice for customers who want to transport cargo such as:

• Bicycles and compatible bike carriers

• Cargo boxes and storage trays

• Skis and snowboards

• Rooftop tents, subject to proper mounting and load requirements

• Other recreational equipment

The T-track crossbars provide versatile accessory mounting options, allowing customers to configure the system for their particular equipment.

Unlike taller bed rack systems, PRO-XE crossbars maintain a relatively low overall profile.

How the PRO-XE Mounts with the Landmark Cover

The mounting arrangement is one of the most important details of this combination.

The PRO-XE attachment brackets secure directly to the truck. The Peragon Landmark cover is installed over those brackets, using its own mounting hardware.

The crossbars do not rely on the Peragon cover to support the cargo load.

Because the two systems mount independently, the cover can open and close completely without adjusting or removing the PRO-XE crossbars.

No drilling or modification is required for installation.

Explore our Truck Bed Crossbar Systems to learn more about available PRO-XE configurations.

CXR Bed Rack vs. PRO-XE Crossbars: Which Should You Choose?

Both systems offer compatibility with the Peragon Landmark tonneau cover, but they serve different purposes.

Choose the CXR if you're building a more comprehensive overland or utility setup and want the flexibility of a full bed rack with extensive accessory mounting opportunities.

Choose the PRO-XE if you prefer a simpler, lower-profile crossbar arrangement for recreational cargo and compatible accessories.

Either way, you can retain the full functionality of your Peragon Landmark tonneau cover.

No Drilling or Modification Required

One of the advantages of KB Voodoo's mounting systems is that they are designed to install without permanently altering the truck.

No drilling or modification is required for installation.

For the CXR and PRO-XE systems discussed here, the rack mounting brackets attach directly to the truck, and the Peragon Landmark cover is installed over those brackets.

The systems use independent mounting hardware, so the rack or crossbars do not need to attach to the tonneau cover itself.

This means customers can enjoy the additional cargo-carrying capability of a bed rack or crossbar system without drilling holes in their truck or modifying the Landmark cover.

Always select the appropriate mounting configuration for your truck model, model year, bed length, and intended cargo.

Frequently Asked Questions About Peragon Landmark Bed Rack Compatibility

Can I install a bed rack with a Peragon Landmark tonneau cover?

Yes. KB Voodoo CXR bed racks and compatible PRO-XE crossbar systems can be installed with the Peragon Landmark retractable tonneau cover.

Will the Peragon Landmark cover still open and close?

Yes. With the compatible CXR or PRO-XE system installed, the Peragon Landmark cover fully opens and closes without removing or adjusting the bed rack or crossbars.

Do I need to drill holes in my truck for installation?

No. No drilling or modification is required for installation.

Does the bed rack attach to the Peragon tonneau cover?

No. KB Voodoo CXR and PRO-XE mounting brackets attach directly to the truck. The Peragon Landmark cover installs over the attachment brackets and uses its own mounting hardware.

Can I carry a rooftop tent above a Peragon Landmark cover?

Yes. The CXR installation shown in this article demonstrates a Roofnest rooftop tent mounted above a Peragon Landmark cover on a Toyota Tacoma. Appropriate rack configuration, tent mounting requirements, and load capacities must always be observed.

Can I use PRO-XE crossbars instead of a full bed rack?

Yes. The PRO-XE system provides a lower-profile alternative to a full CXR rack while maintaining compatibility with the Peragon Landmark cover.

Keep Your Peragon Landmark Cover and Add More Cargo Capacity

Owning a Peragon Landmark tonneau cover doesn't mean you have to give up the convenience of a truck bed rack or crossbar system.

KB Voodoo Fabrications offers two proven options that work with the Landmark while preserving its full opening and closing functionality.

Whether you're building an overland truck with a CXR bed rack or adding versatile cargo-carrying capability with PRO-XE crossbars, you can keep your tonneau cover and expand what your truck can carry.

No drilling or modification is required for installation.

Explore the CXR Truck Bed Rack Systems or browse our Truck Bed Crossbar Systems to find the right configuration for your truck.

For additional information about selecting a tonneau-compatible system, read our Truck Bed Crossbar System Guide.